The chiller is the section of the system where exchange of heat occurred between the water that goes to the building and the evaporator.
In water-cooled condenser, the heat of the liquid is rejected to the water using the shell and tube, shell and coil or double tube heat exchanger..
By rejecting the heat to the atmosphere, The water is then piped to the tower where it's cooled.
By the water at the tower will enter the condenser at, The water that has been cooled 85°F or 29°C.
It picks up the heat from the condenser and leaves at 95°F or 35°C, increase of 10°F or 6°C..
By evaporation of the in the tower, The water is then sent to the tower by the use of pump to be cooled.
The temperature now drops to 85°F or 29°C and enters the condenser again.
The water is piped into fan coil units which consist of fins & fans with large surface area that absorbed heat from the space through the air-heat exchange process.
The water is then pumped back to the evaporator where it's cooled back to 45°F before being circulated back to all the coil units.
alumna of University of Pennsylvania, Roxanne is now Oklahoma, DIY enthusiast, and the proud parent of playful pug...
Read more
Related items:
