Once the alarm beep stops, the device starts to monitor the radon levels and you will have to wait for 48 hours to get the exact initial reading.
Q4.How can you reset the pro 3. Answer You have to hold the button for about 20 seconds — the display should read.
This error occurs the detector should be disconnected from the source for five minutes and powered back up. If Err4 resurfaces, please call the customer service department at 800-748-0298 for instructions on how to have your detector replaced. .
The display will modulate the instant the button is released with LED indicator light lit next to the.
This function is used to test the aural alarm. Press and hold the in for 5 seconds. The alarm will sound 4 chirps as if it's in alarm condition.
the audible alarm will be reset to the on position.
This function allows the user to clear and reset the memory for the short and long- term readings. This should be done anytime the detector is moved to different location. Press and hold the button for 20 seconds. The display will read.
CL will flicker the display will read. for 48 hours until enough samples have been taken to provide accurate reading Please note While using this function, above. .
description of Menu Button Functions can be found on the back of the detector..
It designs, manufactures, and distributes hazardous gas detectors for residential and industrial uses and is based in the city of Grandville, Michigan, USA...
Read more
Related items:
